Karl Marx
Capital Volume One
Contents
Section 1 - The Development of Machinery
. . .
Section 4 - The Factory
. . .
John Stuart Mill says in his "Principles of Political Economy": "It is questionable if all the mechanical inventions yet made have lightened the day's toil of any human being." [1] That is, however, by no means the aim of the capitalistic application of machinery. Like every other increase in the productiveness of labour, machinery is intended to cheapen commodities, and, by shortening that portion of the working-day, in which the labourer works for himself, to lengthen the other portion that he gives, without an equivalent, to the capitalist. In short, it is a means for producing surplus-value.
In manufacture, the revolution in the mode of production begins with the labour-power, in modern industry it begins with the instruments of labour. Our first inquiry then is, how the instruments of labour are converted from tools into machines, or what is the difference between a machine and the implements of a handicraft? We are only concerned here with striking and general characteristics; for epochs in the history of society are no more separated from each other by hard and fast lines of demarcation, than are geological epochs.
Mathematicians and mechanicians, and in this they are followed by a few English economists, call a tool a simple machine, and a machine a complex tool. They see no essential difference between them, and even give the name of machine to the simple mechanical powers, the lever, the inclined plane, the screw, the wedge, &c. [2] As a matter of fact, every machine is a combination of those simple powers, no matter how they may be disguised. From the economic standpoint this explanation is worth nothing, because the historical element is wanting. Another explanation of the difference between tool and machine is that in the case of a tool, man is the motive power, while the motive power of a machine is something different from man, as, for instance, an animal, water, wind, and so on.[3] According to this, a plough drawn by oxen, which is a contrivance common to the most different epochs, would be a machine, while Claussen's circular loom, which, worked by a single labourer, weaves 96,000 picks per minute, would be a mere tool. Nay, this very loom, though a tool when worked by hand, would, if worked by steam, be a machine. And since the application of animal power is one of man's earliest inventions, production by machinery would have preceded production by handicrafts. When in 1735, John Wyatt brought out his spinning machine, and began the industrial revolution of the 18th century, not a word did he say about an ass driving it instead of a man, and yet this part fell to the ass. He described it as a machine "to spin without fingers." [4]
All fully developed machinery consists of three essentially different parts, the motor mechanism, the transmitting mechanism, and finally the tool or working machine. The motor mechanism is that which puts the whole in motion. It either generates its own motive power, like the steam-engine, the caloric engine, the electromagnetic machine, &c., or it receives its impulse from some already existing natural force, like the water-wheel from a head of water, the wind-mill from wind, &c. The transmitting mechanism, composed of fly-wheels, shafting, toothed wheels, pullies, straps, ropes, bands, pinions, and gearing of the most varied kinds, regulates the motion, changes its form. where necessary, as for instance, from linear to circular, and divides and distributes it among the working machines. These two first parts of the whole mechanism are there, solely for putting the working machines in motion, by means of which motion the subject of labour is seized upon and modified as desired. The tool or working machine is that part of the machinery with which the industrial revolution of the 18th century started. And to this day it constantly serves as such a starting-point, whenever a handicraft, or a manufacture, is turned into an industry carried on by machinery.
On a closer examination of the working machine proper, we find in it, as a general rule, though often, no doubt, under very altered forms, the apparatus and tools used by the handicraftsman or manufacturing workman; with this difference, that instead of being human implements, they are the implements of a mechanism, or mechanical implements. Either the entire machine is only a more or less altered mechanical edition of the old handicraft tool, as, for instance, the power-loom,[5] or the working parts fitted in the frame of the machine are old acquaintances, as spindles are in a mule, needles in a stocking-loom, saws in a sawing-machine, and knives in a chopping machine. The distinction between these tools and the body proper of the machine, exists from their very birth; for they continue for the most part to be produced by handicraft, or by manufacture, and are afterwards fitted into the body of the machine, which is the product of machinery. [6] The machine proper is therefore a mechanism that, after being set in motion, performs with its tools the same operations that were formerly done by the workman with similar tools. Whether the motive power is derived from man, or from some other machine, makes no difference in this respect. From the moment that the tool proper is taken from m-an, and fitted into a mechanism, a machine takes the place of a mere implement. The difference strikes one at once, even in those cases where man himself continues to be the prime mover. The number of implements that he himself can use simultaneously, is limited by the number of his own natural instruments of production, by the number of his bodily organs. In Germany, they tried at first to make one spinner work two spinning-wheels, that is, to work simultaneously with both hands and both feet. This was too difficult. Later, a treddle spinning-wheel with two spindles was invented, but adepts in spinning, who could spin two threads at once, were almost as scarce as two-headed men. The Jenny, on the other hand, even at its very birth, spun with 12-18 spindles, and the stocking-loom knits with many thousand needles at once. The number of tools that a machine can bring into play simultaneously, is from the very first emancipated from the organic limits that hedge in the tools of a handicraftsman.
In many manual implements the distinction between man as mere motive power, and man as the workman or operator properly so called, is brought into striking contrast. For instance, the foot is merely the prime mover of the spinning-wheel, while the hand, working with the spindle, and drawing and twisting, performs the real operation of spinning. It is this last part of the handicraftsman's implement that is first seized upon by the industrial revolution, leaving to the workman, in addition to his new labour of watching the machine with his eyes and correcting its mistakes with his hands, the merely mechanical part of being the moving power. On the other hand, implements, in regard to which man has always acted as a simple motive power, as, for instance, by turning the crank of a mill, [7] by pumping, by moving up and down the arm of a bellows, by pounding with a mortar, &c., such implements soon call for the application of animals, water [8] and wind as motive powers. Here and there, long before the period of manufacture, and also, to some extent, during that period, these implements pass over into machines, but without creating any revolution in the mode of production. It becomes evident, in the period of Modern Industry, that these implements, even under their form of manual tools, are already machines. For instance, the pumps with which the Dutch, in 1836-7, emptied the Lake of Harlem, were constructed on the principle of ordinary pumps; the only difference being, that their pistons were driven by cyclopean steam-engines, instead of by men. The common and very imperfect bellows of the blacksmith is, in England, occasionally converted into a blowing-engine, by connecting its arm with a steam-engine. The steam-engine itself, such as it was at its invention, during the manufacturing period at the close of the 17th century, and such as it continued to be down to 1780, [9] did not give rise to any industrial revolution. It was, on the contrary, the invention of machines that made a revolution in the form of steam-engines necessary. As soon as man, instead of working with an implement on the subject of his labour, becomes merely the motive power of an implement-machine, it is a mere accident that motive power takes the disguise of human muscle; and it may equally well take the form of wind, water or steam. Of course, this does not prevent such a change of form from producing great technical alterations in the mechanism that was originally constructed to be driven by man alone. Now-a-days, all machines that have their way to make, such as sewing-machines, bread-making machines, &c., are, unless from their very nature their use on a small scale is excluded, constructed to be driven both by human and by purely mechanical motive power.
The machine, which is the starting-point of the industrial revolution, supersedes the workman, who handles a single tool, by a mechanism operating with a number of similar tools, and set in motion by a single motive power, whatever the form of that power may be? [10] Here we have the machine, but only as an elementary factor of production by machinery.
Increase in the size of the machine, and in the number of its working tools, calls for a more massive mechanism to drive it; and this mechanism requires, in order to overcome its resistance, a mightier moving power than that of man, apart from the fact that man is a very imperfect instrument for producing uniform continued motion. But assuming that he is acting simply as a motor, that a machine has taken the place of his tool, it is evident that he can be replaced by natural forces. Of all the great motors handed down from the manufacturing period, horse-power is the worst, partly because a horse has a head of his own, partly because he is costly, and the extent to which he is applicable in factories is very restricted.[11] Nevertheless the horse was extensively used during the infancy of Modern Industry. This is proved, as well by the complaints of contemporary agriculturists, as by the term "horse-power," which has survived to this day as an expression for mechanical force.
Wind was too inconstant and uncontrollable, and besides, in England, the birthplace of Modern Industry, the use of water-power preponderated even during the manufacturing period. In the 17th century attempts had already been made to turn two pairs of millstones with a single water-wheel. But the increased size of the gearing was too much for the water-power, which had now become insufficient, and this was one of the circumstances that led to a more accurate investigation of the laws of friction. In the same way the irregularity caused by the motive power in mills that were put in motion by pushing and pulling a lever, led to the theory, and the application, of the fly-wheel, which afterwards plays so important a part in Modern Industry. [12] In this way, during the manufacturing period, were developed the first scientific and technical elements of Modern Mechanical Industry. Arkwright's throstle-spinning mill was from the very first turned by water. But for all that, the use of water, as the predominant motive power, was beset with difficulties. It could not be increased at will, it failed at certain seasons of the year, and, above all, it was essentially local. [13] Not till the invention of Watt's second and so-called double-acting steam-engine, was a prime mover found, that begot its own force by the consumption of coal and water, whose power was entirely under man's control, that was mobile and a means of locomotion, that was urban and not, like the waterwheel, rural, that permitted production to be concentrated in towns instead of, like the water-wheels, being scattered up and down the country, [14] that was of universal technical application, and, relatively speaking, little affected in its choice of residence by local circumstances. The greatness of Watt's genius showed itself in the specification of the patent that he took out in April, 1784. In that specification his steam-engine is described, not as an invention for a specific purpose, but as an agent universally applicable in Mechanical Industry. In it he points out applications, many of which, as for instance, the steam-hammer, were not introduced till half a century later. Nevertheless he doubted the use of steam-engines in navigation. His successors, Boulton and Watt, sent to the exhibition of 1851 steam-engines of colossal size for ocean steamers.
As soon as tools had been converted from being manual implements of man into implements of a mechanical apparatus, of a machine, the motive mechanism also acquired an independent form, entirely emancipated from the restraints of human strength. Thereupon the individual machine, that we have hitherto been considering, sinks into a mere factor in production by machinery. One motive mechanism was now able to drive many machines at once. The motive mechanism grows with the number of the machines that are turned simultaneously, and the transmitting mechanism becomes a wide-spreading apparatus.
We now proceed to distinguish the co-operation of a number of machines of one kind from a complex system of machinery.
In the one case, the product is entirely made by a single machine, which performs all the various operations previously done by one handicraftsman with his tool; as, for instance, by a weaver with his loom; or by several handicraftsman successively, either separately or as members of a system of Manufacture. [15] For example, in the manufacture of envelopes, one man folded the paper with the folder, another laid on the gum, a third turned the flap over, on which the device is impressed, a fourth embossed the device, and so on; and for each of these operations the envelope had to change hands. One single envelope machine now performs all these operations at once, and makes more than 3,000 envelopes in an hour. In the London exhibition of 1862, there was an American machine for making paper cornets. It cut the paper, pasted, folded, and finished 300 in a minute. Here, the whole process, which, when carried on as Manufacture, was split up into, and carried out by, a series of operations, is completed by a single machine, working a combination of various tools. Now, whether such a machine be merely a reproduction of a complicated manual implement, or a combination of various simple implements specialised by Manufacture, in either case, in the factory, i.e., in the workshop in which machinery alone is used, we meet again with simple co-operation; and, leaving the workman out of consideration for the moment, this co-operation presents itself to us, in the first instance, as the conglomeration in one place of similar and simultaneously acting machines. Thus, a weaving factory is constituted of a number of power-looms, working side by side, and a sewing factory of a number of sewing-machines all in the same building. But there is here a technical oneness in the whole system, owing to all the machines receiving their impulse simultaneously, and in an equal degree, from the pulsations of the common prime mover, by the intermediary of the transmitting mechanism; and this mechanism, to a certain extent, is also common to them all, since only particular ramifications of it branch off to each machine. Just as a number of tools, then, form the organs of a machine, so a number of machines of one kind constitute the organs of the motive mechanism.
A real machinery system, however, does not take the place of these independent machines, until the subject of labour goes through a connected series of detail processes, that are carried out by a chain of machines of various kinds, the one supplementing the other. Here we have again the co-operation by division of labour that characterises Manufacture; only now, it is a combination of detail machines. The special tools of the various detail workmen, such as those of the beaters, cambers, spinners, &c., in the woollen manufacture, are now transformed into the tools of specialised machines, each machine constituting a special organ, with a special function, in the system. In those branches of industry in which the machinery system is first introduced, Manufacture itself furnishes, in a general way, the natural basis for the division, and consequent organisation, of the process of production. [16] Nevertheless an essential difference at once manifests itself. In Manufacture it is the workmen who, with their manual implements, must, either singly or in groups, carry on each particular detail process. If, on the one hand, the workman becomes adapted to the process, on the other, the process was previously made suitable to the workman. This subjective principle of the division of labour no longer exists in production by machinery. Here, the process as a whole is examined objectively, in itself, that is to say, without regard to the question of its execution by human hands, it is analysed into its constituent phases; and the problem, how to execute each detail process, and bind them all into a whole, is solved by the aid of machines, chemistry, &c. [17] But, of course, in this case also, theory must be perfected by accumulated experience on a large scale. Each detail machine supplies raw material to the machine next in order; and since they are all working at the same time, the product is always going through the various stages of its fabrication, and is also constantly in a state of transition, from one phase to another. Just as in Manufacture, the direct co-operation of the detail labourers establishes a numerical proportion between the special groups, so in an organised system of machinery, where one detail machine is constantly kept employed by another, a fixed relation is established between their numbers, their size, and their speed. The collective machine, now an organised system of various kinds of single machines, and of groups of single machines, becomes more and more perfect, the more the process as a whole becomes a continuous one, i.e., the less the raw material is interrupted in its passage from its first phase to its last; in other words, the more its passage from one phase to another is effected, not by the hand of man, but by the machinery itself. In Manufacture the isolation of each detail process is a condition imposed by the nature of division of labour, but in the fully developed factory the continuity of those processes is, on the contrary, imperative.
A system of machinery, whether it reposes on the mere co-operation of similar machines, as in weaving, or on a combination of different machines, as in spinning, constitutes in itself a huge automaton, whenever it is driven by a self-acting prime mover. But although the factory as a whole be driven by its steam-engine, yet either some of the individual machines may require the aid of the workman for some of their movements (such aid was necessary for the running in of the mule carriage, before the invention of the self-acting mule, and is still necessary in fine-spinning mills); or, to enable a machine to do its work, certain parts of it may require to be handled by the workman like a manual tool; this was the case in machine-makers' workshops, before the conversion of the slide rest into a self-actor. As soon as a machine executes, without man's help, all the movements requisite to elaborate the raw material, needing only attendance from him, we have an automatic system of machinery, and one that is susceptible of constant improvement in its details. Such improvements as the apparatus that stops a drawing frame, whenever a sliver breaks, and the self-acting stop, that stops the power-loom so soon as the shuttle bobbin is emptied of weft, are quite modern inventions. As an example, both of continuity of production, and of the carrying out of the automatic principle, we may take a modern paper mill. In the paper industry generally, we may advantageously study in detail not only the distinctions between modes of production based on different means of production, but also the connexion of the social conditions of production with those modes: for the old German paper-making furnishes us with a sample of handicraft production; that of Holland in the 17th and of France in the 18th century with a sample of manufacturing in the strict sense; and that of modern England with a sample of automatic fabrication of this article. Besides these, there still exist, in India and China, two distinct antique Asiatic forms of the same industry.
An organised system of machines, to which motion is communicated by the transmitting mechanism from a central automaton, is the most developed form of production by machinery. Here we have, in the place of the isolated machine, a mechanical monster whose body fills whole factories, and whose demon power, at first veiled under the slow and measured motions of his giant limbs, at length breaks out into the fast and furious whirl of his countless working organs.
There were mules and steam-engines before there were any labourers, whose exclusive occupation it was to make mules and steam-engines; just as men wore clothes before there were such people as tailors. The inventions of Vaucanson, Arkwright, Watt, and others, were, however, practicable, only because those inventors found, ready to hand, a considerable number of skilled mechanical workmen, placed at their disposal by the manufacturing period. Some of these workmen were independent handicraftsman of various trades, others were grouped together in manufactures, in which, as before-mentioned, division of labour was strictly carried out. As inventions increased in number, and the demand for the newly discovered machines grew larger, the machine-making industry split up, more and more, into numerous independent branches, and division of labour in these manufactures was more and more developed. Here, then, we see in Manufacture the immediate technical foundation of Modern Industry. Manufacture produced the machinery, by means of which Modern Industry abolished the handicraft and manufacturing systems in those spheres of production that it first seized upon. The factory system was therefore raised, in the natural course of things, on an inadequate foundation. When the system attained to a certain degree of development, it had to root up this ready-made foundation, which in the meantime had been elaborated on the old lines, and to build up for itself a basis that should correspond to its methods of production. Just as the individual machine retains a dwarfish character, so long as it is worked by the power of man alone, and just as no system of machinery could be properly developed before the steam-engine took the place of the earlier motive powers, animals, wind, and even water; so, too, Modern Industry was crippled in its complete development, so long as its characteristic instrument of production, the machine, owed its existence to personal strength and personal skill, and depended on the muscular development, the keenness of sight, and the cunning of hand, with which the detail workmen in manufactures, arid the manual labourers in handicrafts, wielded their dwarfish implements' Thus, apart from the dearness of the machines made in this way, a circumstance that is ever present to the mind of the capitalist, the expansion of industries carried on by means of machinery, and the invasion by machinery of fresh branches of production, were dependent on the growth of a class of workmen, who, owing to the almost artistic nature of their employment, could increase their numbers only gradually, and not by leaps and bounds. But besides this, at a certain stage of its development, Modern Industry became technologically incompatible with the basis furnished for it by handicraft and Manufacture. The increasing size of the prime movers, of the transmitting mechanism, and of the machines proper, the greater complication, multiformity and regularity of the details of these machines, as they more and more departed from the model of those originally made by manual labour, and acquired a form, untrammelled except by the conditions under which they worked, [18] the perfecting of the automatic system, and the use, every day more unavoidable, of a more refractory material, such as iron instead of wood-the solution of all these problems, which sprang up by the force of circumstances, everywhere met with a stumbling-block in the personal restrictions, which even the collective labourer of Manufacture could not break through, except to a limited extent. Such machines as the modern hydraulic press, the modern power-loom, and the modern carding engine, could never have been furnished by Manufacture.
A radical change in the mode of production in one sphere of industry involves a similar change in other spheres. This happens at first in such branches of industry as are connected together by being separate phases of a process, and yet are isolated by the social division of labour, in such a way, that each of them produces an independent commodity. Thus spinning by machinery made weaving by machinery a necessity, and both together made the mechanical and chemical revolution that took place in bleaching, printing, and dyeing, imperative. So too, on the other hand, the revolution in cotton-spinning called forth the invention of the gin, for separating the seeds from the cotton fibre; it was only by means of this invention, that the production of cotton became possible on the enormous scale at present required. [19] But more especially, the revolution in the modes of production of industry and agriculture made necessary a revolution in the general conditions of the social process of production, i.e., in the means of communication and of transport. In a society whose pivot, to use an expression of Fourier, was agriculture on a small scale, with its subsidiary domestic industries, and the urban handicrafts, the means of communication and transport were so utterly inadequate to the productive requirements of the manufacturing period, with its extended division of social labour, its concentration of the instruments of labour, and of the workmen, and its colonial markets, that they became in fact revolutionised. In the same way the means of communication and transport handed down from the manufacturing period soon became unbearable trammels on Modern Industry, with its feverish haste of production, its enormous extent, its constant flinging of capital and labour from one sphere of production into another, and its newly-created connexions with the markets of the whole world. Hence, apart from the radical changes introduced in the construction of sailing vessels, the means of communication and transport became gradually adapted to the modes of production of mechanical industry, by the creation of a system of river steamers, railways, ocean steamers, and telegraphs. But the '.huge masses of iron that had now to be forged, to be welded, to be cut, to be bored, and to be shaped, demanded, on their part, cyclopean machines, for the construction of which the methods of the manufacturing period were utterly inadequate.
Modern Industry had therefore itself to take in hand the machine, its characteristic instrument of production, and to construct machines by machines. It was not till it did this, that it built up for itself a fitting technical foundation, and stood on its own feet. Machinery, simultaneously with the increasing use of it, in the first decades of this century, appropriated, by degrees, the fabrication of machines proper. But it was only during the decade preceding 1866, that the construction of railways and ocean steamers on a stupendous scale called into existence the cyclopean machines now employed in the construction of prime movers.
The most essential condition to the production of machines by machines was a prime mover capable of exerting any amount of force, and yet under perfect control. Such a condition was already supplied by the steam-engine. But at the same time it was necessary to produce the geometrically accurate straight lines, planes, circles, cylinders, cones, and spheres, required in the detail parts of the machines. This problem Henry Maudsley solved in the first decade of this century by the invention of the slide rest, a tool that was soon made automatic, and in a modified form was applied to other constructive machines besides the lathe, for which it was originally intended. This mechanical appliance replaces, not some particular tool, but the hand itself, which produces a given form by holding and guiding the cutting tool along the iron or other material operated upon. Thus it became possible to produce the forms of the individual parts of machinery "with a degree of ease, accuracy, and speed, that no accumulated experience of the hand of the most skilled workman could give." [20]
If we now fix our attention on that portion of the machinery employed in the construction of machines, which constitutes the operating tool, we find the manual implements re-appearing, but on a cyclopean scale. The operating part of the boring machine is an immense drill driven by a steam-engine; without this machine, on the other hand, the cylinders of large steam-engines and of hydraulic presses could not be made. The mechanical lathe is only a cyclopean reproduction of the ordinary foot-lathe; the planing machine, an iron carpenter, that works on iron with the same tools that the human carpenter employs on wood; the instrument that, on the London wharves, cuts the veneers, is a gigantic razor; the tool of the shearing machine, which shears iron as easily as a tailor's scissors cut cloth, is a monster pair of scissors; and the steam-hammer works with an ordinary hammer head, but of such a weight that not Thor himself could wield it. [21] These steam-hammers are an invention of Nasmyth, and there is one that weighs over 6 tons and strikes with a vertical fall of 7 feet, on an anvil weighing 36 tons. It is mere child's-play for it to crush a block of granite into powder, yet it is no less capable of driving, with a succession of light taps, a nail into a piece of soft wood. [22]
The implements of labour, in the form of machinery, necessitate the substitution of natural forces for human force, and the conscious application of science, instead of rule of thumb. In Manufacture, the organisation of the social labour-process is purely subjective; it is a combination of detail labourers; in its machinery system, Modern Industry has a productive organism that is purely objective, in which the labourer becomes a mere appendage to an already existing material condition of production. In simple co-operation, and even in that founded on division of labour, the suppression of the isolated, by the collective, workman still appears to be more or less accidental. Machinery, with a few exceptions to be mentioned later, operates only by means of associated labour, or labour in common. Hence the co-operative character of the labour-process is, in the latter case, a technical necessity dictated by the instrument of labour itself.
. . .
At the commencement of this chapter we considered that which we may call the body of the factory, i.e., machinery organised into a system. We there saw how machinery, by annexing the labour of women and children, augments the number of human beings who form the material for capitalistic exploitation, how it confiscates the whole of the workman's disposable time, by immoderate extension of the hours of labour, and how finally its progress, which allows of enormous increase of production in shorter and shorter periods, serves as a means of systematically getting more work done in a shorter time, or of exploiting labour-power more intensely. We now turn to the factory as a whole, and that in its most perfect form.
Dr. Ure, the Pindar of the automatic factory, describes it, on the one hand, as "Combined co-operation of many orders of workpeople, adult and young, in tending with assiduous skill, a system of productive machines, continuously impelled by a central power" (the prime mover); on the other hand, as "a vast automaton, composed of various mechanical and intellectual organs, acting in uninterrupted concert for the production of a common object, all of them being subordinate to a self-regulated moving force." These two descriptions are far from being identical. In one, the collective labourer, or social body of labour, appears as the dominant subject, and the mechanical automaton as the object; in the other, the automaton itself is the subject, and the workmen are merely conscious organs, co-ordinate with the unconscious organs of the automaton, and together with them, subordinated to the central moving-power. The first description is applicable to every possible employment of machinery on a large scale, the second is characteristic of its use by capital, and therefore of the modern factory system. Ure prefers therefore, to describe the central machine, from which the motion comes, not only as an automaton, but as an autocrat. "In these spacious halls the benignant power of steam summons around him his myriads of willing menials." [97]
Along with the tool, the skill of the workman in handling it passes over to the machine. The capabilities of the tool are emancipated from the restraints that are inseparable from human labour-power. Thereby the technical foundation on which is based the division of labour in Manufacture, is swept away. Hence, in the place of the hierarchy of specialised workmen that characterises manufacture, there steps, in the automatic factory, a tendency to equalise and reduce to one and the same level every kind of work that has to be done by the minders of the machines; [98] in the place of the artificially produced differentiations of the detail workmen, step the natural differences of age and sex.
So far as division of labour re-appears in the factory, it is primarily a distribution of the workmen among the specialised machines; and of masses of workmen, not however organised into groups, among the various departments of the factory, in each of which they work at a number of similar machines placed together; their co-operation, therefore, is only simple. The organised group, peculiar to manufacture, is replaced by the connexion between the head workman and his few assistants. The essential division is, into workmen who are actually employed on the machines (among whom are included a few who look after the engine), and into mere attendants (almost exclusively children) of these workmen. Among the attendants are reckoned more or less all "Feeders" who supply the machines with the material to be worked. In addition to these two principal classes, there is a numerically unimportant class of persons, whose occupation it is to look after the whole of the machinery and repair it from time to time; such as engineers, mechanics, joiners, &c. This is a superior class of workmen, some of them scientifically educated, others brought up to a trade; it is distinct from the factory operative class, and merely aggregated to it. [99] This division of labour is purely technical.
To work at a machine, the workman should be taught from childhood, in order that he may learn to adapt his own movements to the uniform and unceasing motion of an automaton. When the machinery, as a whole, forms a system of manifold machines, working simultaneously and in concert, the co-operation based upon it, requires the distribution of various groups of workmen among the different kinds of machines. But the employment of machinery does away with the necessity of crystallising this distribution after the manner of Manufacture, by the constant annexation of a particular man to a particular function. [100] Since the motion of the whole system does not proceed from the workman, but from the machinery, a change of persons can take place at any time without an interruption of the work. The most striking proof of this is afforded by the relays system, put into operation by the manufacturers during their revolt from 1848-1850. Lastly, the quickness with which machine work is learnt by young people, does away with the necessity of bringing up for exclusive employment by machinery, a special class of operatives. [101] With regard to the work of the mere attendants, it can, to some extent, be replaced in the mill by machines, [102] and owing to its extreme simplicity, it allows of a rapid and constant change of the individuals burdened with this drudgery.
Although then, technically speaking, the old system of division of labour is thrown overboard by machinery, it hangs on in the factory, as a traditional habit handed down from Manufacture, and is afterwards systematically re-moulded and established in a more hideous form by capital, as a means of exploiting labour-power. The life-long speciality of handling one and the same tool, now becomes the life-long speciality of serving one and the same machine. Machinery is put to a wrong use, with the object of transforming the workman, from his very childhood, into a part of a detail-machine. [103] In this way, not only are the expenses of his reproduction considerably lessened, but at the same time his helpless dependence upon the factory as a whole, and therefore upon the capitalist, is rendered complete. Here as everywhere else, we must distinguish between the increased productiveness due to the development of the social process of production, and that due to the capitalist exploitation of that process. In handicrafts and manufacture, the workman makes use of a tool, in the factory, the machine makes use of him. There the movements of the instrument of labour proceed from him, here it is the movements of the machine that he must follow. In manufacture the workmen are parts of a living mechanism. In the factory we have a lifeless mechanism independent of the workman, who becomes its mere living appendage. "The miserable routine of endless drudgery and toil in which the same mechanical process is gone through over and over again, is like the labour of Sisyphus. The burden of labour, like the rock, keeps ever falling back on the worn-out labourer." [104] At the same time that factory work exhausts the nervous system to the uttermost, it does away with the many-sided play of the muscles, and confiscates every atom of freedom, both in bodily and intellectual activity. [105] The lightening of the labour, even, becomes a sort of torture, since the machine does not free the labourer from work, but deprives the work of all interest. Every kind of capitalist production, in so far as it is not only a labour-process, but also a process of creating surplus-value, has this in common, that it is not the workman that employs the instruments of labour, but the instruments of labour that employ the workman. But it is only in the factory system that this inversion for the first time acquires technical and palpable reality. By means of its conversion into an automaton, the instrument of labour confronts the labourer, during the labour-process, in the shape of capital, of dead labour, that dominates, and pumps dry, living labour-power. The separation of the intellectual powers of production from the manual labour, and the conversion of those powers into the might of capital over labour, is, as we have already shown. finally completed by modern industry erected on the foundation of machinery. The special skill of each individual insignificant factory operative vanishes as an infinitesimal quantity before the science, the gigantic physical forces, and the mass of labour that are embodied in the factory mechanism and, together with that mechanism, constitute the power of the "master." This "master," therefore, in whose brain the machinery and his monopoly of it are inseparably united, whenever he falls out with his "hands," contemptuously tells them: "The factory operatives should keep in wholesome remembrance the fact that theirs is really a low species of skilled labour; and that there is none which is more easily acquired, or of its quality more amply remunerated, or which by a short training of the least expert can be more quickly, as well as abundantly, acquired.... The master's machinery really plays a far more important part in the business of production than the labour and the skill of the operative, which six months' education can teach, and a common labourer can learn." [106] The technical subordination of the workman to the uniform motion of the instruments of labour, and the peculiar composition of the body of workpeople, consisting as it does of individuals of both sexes and of all ages, give rise to a barrack discipline, which is elaborated into a complete system in the factory, and which fully develops the before mentioned labour of overlooking, thereby dividing the workpeople into operatives and overlookers, into private soldiers and sergeants of an industrial army. "The main difficulty [in the automatic factory] ... lay ... above all in training human beings to renounce their desultory habits of work, and to identify themselves with the unvarying regularity of the complex automaton. To devise and administer a successful code of factory discipline, suited to the necessities of factory diligence, was the Herculean enterprise, the noble achievement of Arkwright! Even at the present day, when the system is perfectly organised and its labour lightened to the utmost, it is found nearly impossible to convert persons past the age of puberty, into useful factory hands." [107] The factory code in which capital formulates, like a private legislator, and at his own good will, his autocracy over his workpeople, unaccompanied by that division of responsibility, in other matters so much approved of by the bourgeoisie, and unaccompanied by the still more approved representative system, this code is but the capitalistic caricature of that social regulation of the labour-process which becomes requisite in co-operation on a great scale, and in the employment in common, of instruments of labour and especially of machinery. The place of the slave-driver's lash is taken by the overlooker's book of penalties. All punishments naturally resolve themselves into fines and deductions from wages, and the law-giving talent of the factory Lycurgus so arranges matters, that a violation of his laws is, if possible, more profitable to him than the keeping of them. [108] We shall here merely allude to the material conditions under which factory labour is carried on. Every organ of sense is injured in an equal degree by artificial elevation of the temperature, by the dust-laden atmosphere, by the deafening noise, not to mention danger to life and limb among the thickly crowded machinery, which, with the regularity of the seasons, issues its list of the killed and wounded in the industrial battle. [109] Economy of the social means of production, matured and forced as in a hothouse by the factory system, is turned, in the hands of capital, into systematic robbery of what is necessary for the life of the workman while he is at work, robbery of space, light, air, and of protection to his person against the dangerous and unwholesome accompaniments of the productive process, not to mention the robbery of appliances for the comfort of the workman. [110] Is Fourier wrong when he calls factories "tempered bagnos"? [111]
. . .
[1] Mill should have said, "of any human being not fed by other people's labour," for, without doubt, machinery has greatly increased the number of well-to-do idlers.
[2] See, for instance, Hutton: "Course of Mathematics."
[3] "From this point of view we may draw a sharp line of distinction between a tool and a machine: spades, hammers, chisels, &c., combinations of levers and of screws, in all of which, no matter how complicated they may be in other respects, man is the motive power, ... all this falls under the idea of a tool; but the plough, which is drawn by animal power, and wind-mills, &c., must be classed among machines." (Wilhelm Schulz: "Die Bewegung der Produktion." Zürich, 1843, p. 38.) In many respects a book to be recommended.
[4] Before his time, spinning machines, although very imperfect ones, had already been used, and Italy was probably the country of their first appearance. A critical history of technology would show how little any of the inventions of the 18th century are the work of a single individual. Hitherto there is no such book. Darwin has interested us in the history of Nature's Technology, i.e., in the formation of the organs of plants and animals, which organs serve as instruments of production for sustaining life. Does not the history of the productive organs of man, of organs that are the material basis of all social organisation, deserve equal attention? And would not such a history be easier to compile, since, as Vico says, human history differs from natural history in this, that we have made the former, but not the latter? Technology discloses man's mode of dealing with Nature, the process of production by which he sustains his life, and thereby also lays bare the mode of formation of his social relations, and of the mental conceptions that flow from them. Every history of religion, even, that fails to take account of this material basis, is uncritical. It is, in reality, much easier to discover by analysis the earthly core of the misty creations of religion, than, conversely, it is, to develop from the actual relations of life the corresponding celestialised forms of those relations. The latter method is the only materialistic, and therefore the only scientific one. The weak points in the abstract materialism of natural science, a materialism that excludes history and its process, are at once evident from the abstract and ideological conceptions of its spokesmen, whenever they venture beyond the bounds of their own speciality.
[5] Especially in the original form of the power-loom, we recognise, at the first glance, the ancient loom. In its modern form, the power-loom has undergone essential alterations.
[6] It is only during the last 15 years (i.e., since about 1850), that a constantly increasing portion of these machine tools have been made in England by machinery, and that not by the same manufacturers who make the machines. Instances of machines for the fabrication of these mechanical tools are, the automatic bobbin-making engine, the cardsetting engine, shuttle-making machines, and machines for forging mule and throstle spindles.
[7] Moses says: "Thou shalt not muzzle the ox that treads the corn." The Christian philanthropists of Germany, on the contrary, fastened a wooden board round the necks of the serfs, whom they used as a motive power for grinding, in order to prevent them from putting flour into their mouths with their hands.
[8] It was partly the want of streams with a good fall on them, and partly their battles with superabundance of water in other respects, that compelled the Dutch to resort to wind as a motive power. The wind-mill itself they got from Germany, where its invention was the origin of a pretty squabble between the nobles, the priests, and the emperor, as to which of those three the wind "belonged." The air makes bondage, was the cry in Germany, at the same time that the wind was making Holland free. What it reduced to bondage in this case, was not the Dutchman, but the land for the Dutchman. In 1836, 12,000 windmills of 6,000 horse-power were still employed in Holland, to prevent two-thirds of the land from being reconverted into morasses.
[9] It was, indeed, very much improved by Watt's first so-called single acting engine; but, in this form, it continued to be a mere machine for raising water, and the liquor from salt mines.
[10] "The union of all these simple instruments, set in motion by a single motor, constitutes a machine." (Babbage, l.c.)
[11] In January, 1861, John C. Morton read before the Society of Arts a paper on "The forces employed in agriculture." He there states: "Every improvement that furthers the uniformity of the land makes the steam-engine more and more applicable to the production of pure mechanical force.... Horse-power is requisite wherever crooked fences and other obstructions prevent uniform action. These obstructions are vanishing day by day. For operations that demand more exercise of will than actual force, the only power applicable is that controlled every instant by the human mind-in other words, man-power." Mr. Morton then reduces steam-power, horse-power, and man-power, to the unit in general use for steam-engines, namely, the force required to raise 33,000 lbs. one foot in one minute, and reckons the cost of one horse-power from a steam-engine to be 3d., and from a horse to be 5-1/2d. per hour. Further, if a horse must fully maintain its health, it can work no more than 8 hours a day. Three at the least out of every seven horses used on tillage land during the year can be dispensed with by using steam-power, at an expense not greater than that which, the horses dispensed with, would cost during the 3 or 4 months in which alone they can be used effectively. Lastly, steam-power, in those agricultural operations in which it can be employed, improves, in comparison with horse-power, the quality of the work. To do the work of a steam-engine would require 66 men, at a total cost of 15S. an hour, and to do the work of a horse, 32 men, at a total cost of 8s. an hour.
[12] Faulhaber, 1625; De Caus, 1688.
[13] The modern turbine frees the industrial exploitation of water-power from many of its former fetters.
[14] "In the early days of textile manufactures, the locality of the factory depended upon the existence of a stream having a sufficient fall to turn a water-wheel; and, although the establishment of the water-mills was the commencement of the breaking up of the domestic system of manufacture, yet the mills necessarily situated upon streams, and frequently at considerable distances the one from the other, formed part of a rural, rather than an urban system; and it was not until the introduction of the steam-power as a substitute for the stream that factories were congregated in towns, and localities where the coal and water required for the production of steam were found in sufficient quantities. The steam-engine is the parent of manufacturing towns." (A. Redgrave in "Reports of the Insp. of Fact., 30th April, 1860," p. 36.)
[15] From the standpoint of division of labour in Manufacture, weaving was not simple, but, on the contrary, complicated manual labour; and consequently the power-loom is a machine that does very complicated work. It is altogether erroneous to suppose that modern machinery originally appropriated those operations alone, which division of labour had simplified. Spinning and weaving were, during the manufacturing period, split up into new species, and the implements were modified and improved; but the labour itself was in no way divided, and it retained its handicraft character. It is not the labour, but the instrument of labour, that serves as the starting-point of the machine.
[16] Before the epoch of Mechanical Industry, the wool manufacture was the predominating manufacture in England. Hence it was in this industry that, in the first half of the 18th century, the most experiments were made. Cotton, which required less careful preparation for its treatment by machinery, derived the benefit of the experience gained on wool, just as afterwards the manipulation of wool by machinery was developed on the lines of cotton-spinning and weaving by machinery. It was only during the 10 years immediately preceding 1866, that isolated details of the wool manufacture, such as woolcombing, were incorporated in the factory system. "The application of power to the process of combing wool ... extensively in operation since the introduction of the combingmachine, especially Lister's ... undoubtedly had the effect of throwing a very large number of men out of work. Wool was formerly combed by hand, most frequently in the cottage of the comber. It is now very generally combed in the factory, and hand-labour is superseded, except in some particular kinds of work, in which hand-combed wool is still preferred. Many of the hand-combers found employment in the factories, but the produce of the hand-combers bears so small a proportion to that of the machine, that the employment of a very large number of combers has passed away." ("Rep. of lnsp. of Fact. for 31st Oct., 1856," p. 16.)
[17] "The principle of the factory system, then, is to substitute ... the partition of a process into its essential constituents, for the division or graduation of labour among artisans." (Andrew Ure: "The Philosophy of Manufactures," Lond., 1835, p. 20.)
[18] The power-loom was at first made chiefly of wood; in its improved modern form it is made of iron. To what an extent the old forms of the instruments of production influenced their new forms at first starting, is shown by, amongst other things, the most superficial comparison of the present power-loom with the old one, of the modern blowing apparatus of a blast-furnace with the first inefficient mechanical reproduction of the ordinary bellows, and perhaps more strikingly than in any other way, by the attempts before the invention of the present locomotive, to construct a locomotive that actually had two feet, which after the fashion of a horse, it raised alternately from the ground. It is only after considerable development of the science of mechanics, and accumulated practical experience, that the form of a machine becomes settled entirely in accordance with mechanical principles, and emancipated from the traditional form of the tool that gave rise to it.
[19] Eli Whitney's cotton gin had until very recent times undergone less essential changes than any other machine of the 18th century. It is only during the last decade (i.e., since 1856) that another American, Mr. Emery, of Albany, New York, has rendered Whitney's gin antiquated by an improvement as simple as it is effective.
[20] "The Industry of Nations," Lond., 1855, Part II., p. 239. This work also remarks: 'Simple and outwardly unimportant as this appendage to lathes may appear, it is not, we believe, averring too much to state, that its influence in improving and extending the use of machinery has been as great as that produced by Watt's improvements of the steam-engine itself. Its introduction went at once to perfect all machinery, to cheapen it, and to stimulate invention and improvement."
[21] One of these machines, used for forging paddle-wheel shafts in London, is called "Thor." It forges a shaft of 16 1/2 tons with as much ease as a blacksmith forges a horseshoe.
[22] Wood-working machines that are also capable of being employed on a small scale are mostly American inventions.
. . .
[97] Ure, l.c., p. 18.
[98] Ure, l.c., P. 3 1. See Karl Marx, l.c., pp. 140-141.
[99] It looks very like intentional misleading by statistics (which misleading it would be possible to prove in detail in other cases too), when the English factory legislation excludes from its operation the class of labourers last mentioned in the text, while the parliamentary returns expressly include in the category of factory operatives, not only engineers, mechanics, &c., but also managers, salesmen, messengers, warehousemen, packers, &c., in short everybody, except the owner of the factory himself.
[100] Ure grants this. He says, "in case of need," the workmen can be moved at the will of the manager from one machine to another, and he triumphantly exclaims: "Such a change is in flat contradiction with the old routine, that divides the labour, and to one workman assigns the task of fashioning the head of a needle, to another the sharpening of the point." He had much better have asked himself, why this "old routine" is departed from in theautomatic factory, only "in case of need. "
[101] When distress is very great, as, for instance, during the American Civil War, the factory operative is now and then set by the Bourgeois to do the roughest Of Work, such as road-making, &c.. The English "ateliers nationaux" of 1862 and the following years, established for the benefit of the destitute cotton operatives, differ from the French of 1848 in this, that in the latter the workmen had to do unproductive work at the expense of the state, in the former they had to do productive municipal work to the advantage of the bourgeois, and that, too, cheaper than the regular workmen, with whom they were thus thrown into competition. "The physical appearance of the cotton operatives is unquestionably improved. This I attribute ... as to the men, to outdoor labour on public works." ("Rep. of Insp. of Fact., 31st Oct., 1863," p. 59.) The writer here alludes to the Preston factory operatives, who were employed on Preston Moor.
[102] An example: The various mechanical apparatus introduced since the Act of 1844 into woollen mills, for replacing the labour of children. So soon as it shall happen that the children of the manufacturers themselves have to go through a course of schooling as helpers in the mill, this almost unexplored territory of mechanics will soon make remarkable progress. "Of machinery, perhaps self-acting mules are as dangerous as any other kind. Most of the accidents from them happen to little children, from their creeping under the mules to sweep the floor whilst the mules are in motion. Several 'minders' have been fined for this offence, but without much general benefit. If machine makers would only invent a self-sweeper, by whose use the necessity for these little children to creep under the machinery might be prevented, it would be a happy addition to our protective measures." ("Reports of Insp. of Fact. for 31st. Oct., 1866," p. 63.)
[103] So much then for Proudhon's wonderful idea: he "construes" machinery not as a synthesis of instruments of labour, but as a synthesis of detail operations for the benefit of the labourer himself.
[104] F. Engels, l.c., p. 217. Even an ordinary and optimist Free-trader, like Mr. Molinari, goes so far as to say, "Un homme s'use plus vite en surveillant, quinze heures par jour, l'évolution uniforme d'un mécanisme, qu'en exercant, dans le même espace de temps, sa force physique. Ce travail de surveillance qui servirait peut-être d'utile gymnastique à l'intelligence, s'il n'était pas trop prolongé, détruit à la longue, par son excès, et l'intelligence, et le corps même." (G. de Molinari: "Études Économiques." Paris, 1846.)
[105] F. Engels, l.c., p. 216.
[106] "The Master Spinners' and Manufacturers' Defence Fund. Report of the Committee." Manchester, 1854, p. 17. We shall see hereafter, that the "master" can sing quite another song, when he is threatened with the loss of his "living" automaton.
[107] Ure, l.c., p. 15. Whoever knows the life history of Arkwright, will never dub this barber-genius "noble." Of all the great inventors of the 18th century, he was incontestably the greatest thiever of other people's inventions and the meanest fellow.
[108] "The slavery in which the bourgeoisie has bound the proletariat, comes nowhere more plainly into daylight than in the factory system. In it all freedom comes to an end both at law and in fact. The workman must be in the factory at half past five. If he come a few minutes late, he is punished; if he come 10 minutes late, he is not allowed to enter until after breakfast, and thus loses a quarter of a day's wage. He must eat, drink and sleep at word of command.... The despotic bell calls him from his bed, calls him from breakfast and dinner. And how does he fare in the mill? There the master is the absolute law-giver. He makes what regulations he pleases; he alters and makes additions to his code at pleasure; and if he insert the veriest nonsense, the courts say to the workman: Since you have entered into this contract voluntarily, you must now carry it out .... These workmen are condemned to live, from their ninth year till their death, under this mental and bodily torture." (F. Engels, l.c., p. 217, sq.) What, "the courts say," I will illustrate by two examples. One occurs at Sheffield at the end of 1866. In that town a workman had engaged himself for 2 years in a steelworks. In consequence of a quarrel with his employer he left the works, and declared that under no circumstances would he work for that master any more. He was prosecuted for breach of contract, and condemned to two months' imprisonment. (If the master break the contract, he can be proceeded against only in a civil action, and risks nothing but money damages.) After the workman has served his two months, the master invites him to return to the works, pursuant to the contract. Workman says: No, he has already been punished for the breach. The master prosecutes again, the court condemns again, although one of the judges, Mr. Shee, publicly denounces this as a legal monstrosity, by which a man can periodically, as long as he lives, be punished over and over again for the same offence or crime. This judgment was given not by the "Great Unpaid," the provincial Dogberries, but by one of the highest courts of justice in London. — [Added in the 4th German edition. — This has now been done away with. With few exceptions, e.g., when public gas-works are involved, the worker in England is now put on an equal footing with the employer in case of breach of contract and can be sued only civilly. — F. E.] The second case occurs in Wiltshire at the end of November 1863. About 30 power-loom weavers, in the employment of one Harrup, a cloth manufacturer at Leower's Mill, Westbury Leigh, struck work because master Harrup indulged in the agreeable habit of making deductions from their wages for being late in the morning; 6d. for 2 minutes; 1s. for 3 minutes, and 1s. 6d. for ten minutes. This is at the rate of 9s. per hour, and £4 10s. 0d. per diem; while the wages of the weavers on the average of a year, never exceeded 10s. to 12s. weekly. Harrup also appointed a boy to announce the starting time by a whistle, which he often did before six o'clock in the morning: and if the hands were not all there at the moment the whistle ceased, the doors were closed, and those hands who were outside were fined: and as there was no clock on the premises, the unfortunate hands were at the mercy of the young Harrup-inspired time-keeper. The hands on strike, mothers of families as well as girls, offered to resume work if the timekeeper were replaced by a clock, and a more reasonable scale of fines were introduced. Harrup summoned I9 women and girls before the magistrates for breach of contract. To the utter indignation of all present, they were each mulcted in a fine of 6d. and 2s. 6d. for costs. Harrup was followed from the court by a crowd of people who hissed him. A favourite operation with manufacturers is to punish the workpeople by deductions made from their wages on account of faults in the material worked on. This method gave rise in 1866 to a general strike in the English pottery districts. The reports of the Ch. Empl. Corn. (1863-1866), give cases where the worker not only receives no wages, but becomes, by means of his labour, and of the penal regulations, the debtor to boot, of his worthy master. The late cotton crisis also furnished edifying examples of the sagacity shown by the factory autocrats in making deductions from wages. Mr. R. Baker, the Inspector of Factories, says, "I have myself had lately to direct prosecutions against one cotton mill occupier for having in these pinching and painful times deducted 10d. a piece from some of the young workers employed by him, for the surgeon's certificate (for which he himself had only paid 6d.), when only allowed by the law to deduct 3d., and by custom nothing at all .... And I have been informed of another, who, in order to keep without the law, but to attain the same object, charges the poor children who work for him a shilling each, as a fee for learning them the art and mystery of cotton spinning, so soon as they are declared by the surgeon fit and proper persons for that occupation. There may therefore be undercurrent causes for such extraordinary exhibitions as strikes, not only wherever they arise, but particularly at such times as the present, which without explanation, render them inexplicable to the public understanding." He alludes here to a strike of power-loom weavers at Darwen, June, 1863. ("Reports of Insp. of Fact. for 30 April, 1863," pp. 50-51.) The reports always go beyond their official dates.
[109] The protection afforded by the Factory Acts against dangerous machinery has had a beneficial effect. "But ... there are other sources of accident which did not exist twenty years since; one especially, viz., the increased speed of the machinery. Wheels, rollers, spindles and shuttles are now propelled at increased and increasing rates; fingers must be quicker and defter in their movements to take up the broken thread, for, if placed with hesitation or carelessness, they are sacrificed.... A large number of accidents are caused by the eagerness of the workpeople to get through their work expeditiously. It must be remembered that it is of the highest importance to manufacturers that their machinery should be in motion, i.e., producing yams and goods. Every minute's stoppage is not only a loss of power, but of production, and the workpeople are urged by the overlookers, who are interested in the quantity of work turned off, to keep the machinery in motion, and it is no less important to those of the operatives who are paid by the weight or piece, that the machines should be kept in motion. Consequently, although it is strictly forbidden in many, nay in most factories, that machinery should be cleaned while in motion, it is nevertheless the constant practice in most, if not in all, that the workpeople do, unreproved, pick out waste, wipe rollers and wheels, &c., while their frames are in motion. Thus from this cause only, 906 accidents have occurred during the six months.... Although a great deal of cleaning is constantly going on day by day, yet Saturday is generally the day set apart for the thorough cleaning of the machinery, and a great deal of this is done while the machinery is in motion." Since cleaning is not paid for, the workpeople seek to get done with it as speedily as possible. Hence "the number of accidents which occur on Fridays, and especially on Saturdays, is much larger than on any other day. On the former day the excess is nearly '.2 per cent. over the average number of the four first days of the week, and on the latter day the excess is 25 per cent. over the average of the preceding five days; or, if the number of working-hours on Saturday being taken into account — 7 1/2 hours on Saturday as compared with 10 1/2 on other days — there is an excess of 65 per cent. on Saturdays over the average of the other five days." ("Rep. of Insp. of Fact., 31st Oct., 1866," pp. 9, 15, 16, 17.)
[110] In Part I. of Book III. I shall give an account of a recent campaign by the English manufacturers against the Clauses in the Factory Acts that protect the "hands" against dangerous machinery. For the present, let this one quotation from the official report of Leonard Horner suffice: "I have heard some mill-owners speak with inexcusable levity of some of the accidents; such, for instance, as the loss of a finger being a trifling matter. A working-man's living and prospects depend so much upon his fingers, that any loss of them is a very serious matter to him. When I have heard such inconsiderate remarks made, I have usually put this question: Suppose you were in want of an additional workman, and two were to apply, both equally well qualified in other respects, but one had lost a thumb or a forefinger, which would you engage? There never was a hesitation as to the answer...." The manufacturers have "mistaken prejudices against what they have heard represented as a pseudo-philanthropic legislation." ("Rep. of Insp. of Fact., 31st Oct., 1855.") These manufacturers are clever folk, and not without reason were they enthusiastic for the slave-holders' rebellion.
[111] In those factories that have been longest subject to the Factory Acts, with their compulsory limitation of the hours of labour, and other regulations, many of the older abuses have vanished. The very improvement of the machinery demands to a certain extent "improved construction of the buildings," and this is an advantage to the workpeople. (See "Rep. of Insp. of Fact. for 31st Oct., 1863," p. 109.)
. . .
Transcribed by Zodiac
Html Markup by Stephen Baird (1999)
The Grundrisse
. . .
In machinery, the appropriation of living labour by capital achieves a direct reality . . . It is, firstly, the analysis and application of mechanical and chemical laws, arising directly out of science, which enables the machine to perform the same labour as that previously performed by the worker. However, the development of machinery along this path occurs only when large industry has already reached a higher stage, and all the sciences have been pressed into the service of capital; and when, secondly, the available machinery itself already provides great capabilities. Invention then becomes a business, and the application of science to direct production itself becomes a prospect which determines and solicits it. But this is not the road along which machinery, by and large, arose, and even less the road on which it progresses in detail. This road is, rather, dissection [Analyse] – through the division of labour, which gradually transforms the workers’ operations into more and more mechanical ones, so that at a certain point a mechanism can step into their places. (See under economy of power.) Thus, the specific mode of working here appears directly as becoming transferred from the worker to capital in the form of the machine, and his own labour capacity devalued thereby. Hence the workers’ struggle against machinery. What was the living worker’s activity becomes the activity of the machine. Thus the appropriation of labour by capital confronts the worker in a coarsely sensuous form; capital absorbs labour into itself – ‘as though its body were by love possessed’. [3]
The exchange of living labour for objectified labour – i.e. the positing of social labour in the form of the contradiction of capital and wage labour – is the ultimate development of the value-relation and of production resting on value. Its presupposition is – and remains – the mass of direct labour time, the quantity of labour employed, as the determinant factor in the production of wealth. But to the degree that large industry develops, the creation of real wealth comes to depend less on labour time and on the amount of labour employed than on the power of the agencies set in motion during labour time, whose ‘powerful effectiveness’ is itself in turn out of all proportion to the direct labour time spent on their production, but depends rather on the general state of science and on the progress of technology, or the application of this science to production. (The development of this science, especially natural science, and all others with the latter, is itself in turn related to the development of material production.) Agriculture, e.g., becomes merely the application of the science of material metabolism, its regulation for the greatest advantage of the entire body of society. Real wealth manifests itself, rather – and large industry reveals this – in the monstrous disproportion between the labour time applied, and its product, as well as in the qualitative imbalance between labour, reduced to a pure abstraction, and the power of the production process it superintends. Labour no longer appears so much to be included within the production process; rather, the human being comes to relate more as watchman and regulator to the production process itself. (What holds for machinery holds likewise for the combination of human activities and the development of human intercourse.) No longer does the worker insert a modified natural thing [Naturgegenstand] as middle link between the object [Objekt] and himself; rather, he inserts the process of nature, transformed into an industrial process, as a means between himself and inorganic nature, mastering it. He steps to the side of the production process instead of being its chief actor. In this transformation, it is neither the direct human labour he himself performs, nor the time during which he works, but rather the appropriation of his own general productive power, his understanding of nature and his mastery over it by virtue of his presence as a social body – it is, in a word, the development of the social individual which appears as the great foundation-stone of production and of wealth. The theft of alien labour time, on which the present wealth is based, appears a miserable foundation in face of this new one, created by large-scale industry itself. As soon as labour in the direct form has ceased to be the great well-spring of wealth, labour time ceases and must cease to be its measure, and hence exchange value [must cease to be the measure] of use value. The surplus labour of the mass has ceased to be the condition for the development of general wealth, just as the non-labour of the few, for the development of the general powers of the human head. With that, production based on exchange value breaks down, and the direct, material production process is stripped of the form of penury and antithesis. The free development of individualities, and hence not the reduction of necessary labour time so as to posit surplus labour, but rather the general reduction of the necessary labour of society to a minimum, which then corresponds to the artistic, scientific etc. development of the individuals in the time set free, and with the means created, for all of them. Capital itself is the moving contradiction, [in] that it presses to reduce labour time to a minimum, while it posits labour time, on the other side, as sole measure and source of wealth. Hence it diminishes labour time in the necessary form so as to increase it in the superfluous form; hence posits the superfluous in growing measure as a condition – question of life or death – for the necessary. On the one side, then, it calls to life all the powers of science and of nature, as of social combination and of social intercourse, in order to make the creation of wealth independent (relatively) of the labour time employed on it. On the other side, it wants to use labour time as the measuring rod for the giant social forces thereby created, and to confine them within the limits required to maintain the already created value as value. Forces of production and social relations – two different sides of the development of the social individual – appear to capital as mere means, and are merely means for it to produce on its limited foundation. In fact, however, they are the material conditions to blow this foundation sky-high. ‘Truly wealthy a nation, when the working day is 6 rather than 12 hours. Wealth is not command over surplus labour time’ (real wealth), ‘but rather, disposable time outside that needed in direct production, for every individual and the whole society.’ (The Source and Remedy etc. 1821, p. 6.)
Nature builds no machines, no locomotives, railways, electric telegraphs, self-acting mules etc. These are products of human industry; natural material transformed into organs of the human will over nature, or of human participation in nature. They are organs of the human brain, created by the human hand; the power of knowledge, objectified. The development of fixed capital indicates to what degree general social knowledge has become a direct force of production, and to what degree, hence, the conditions of the process of social life itself have come under the control of the general intellect and been transformed in accordance with it. To what degree the powers of social production have been produced, not only in the form of knowledge, but also as immediate organs of social practice, of the real life process.
The development of fixed capital indicates in still another respect the degree of development of wealth generally, or of capital. The aim of production oriented directly towards use value, as well as of that directly oriented towards exchange value, is the product itself, destined for consumption. The part of production which is oriented towards the production of fixed capital does not produce direct objects of individual gratification, nor direct exchange values; at least not directly realizable exchange values. Hence, only when a certain degree of productivity has already been reached – so that a part of production time is sufficient for immediate production – can an increasingly large part be applied to the production of the means of production. This requires that society be able to wait; that a large part of the wealth already created can be withdrawn both from immediate consumption and from production for immediate consumption, in order to employ this part for labour which is not immediately productive (within the material production process itself). This requires a certain level of productivity and of relative overabundance, and, more specifically, a level directly related to the transformation of circulating capital into fixed capital. As the magnitude of relative surplus labour depends on the productivity of necessary labour, so does the magnitude of labour time – living as well as objectified – employed on the production of fixed capital depend on the productivity of the labour time spent in the direct production of products. Surplus population (from this standpoint), as well as surplus production, is a condition for this. That is; the output of the time employed in direct production must be larger, relatively, than is directly required for the reproduction of the capital employed in these branches of industry. The smaller the direct fruits borne by fixed capital, the less it intervenes in the direct production process, the greater must be this relative surplus population and surplus production; thus, more to build railways, canals, aqueducts, telegraphs etc. than to build the machinery directly active in the direct production process. Hence – a subject to which we will return later – in the constant under- and overproduction of modern industry – constant fluctuations and convulsions arise from the disproportion, when sometimes too little, then again too much circulating capital is transformed into fixed capital.
<The creation of a large quantity of disposable time apart from necessary labour time for society generally and each of its members (i.e. room for the development of the individuals’ full productive forces, hence those of society also), this creation of not-labour time appears in the stage of capital, as of all earlier ones, as not-labour time, free time, for a few. What capital adds is that it increases the surplus labour time of the mass by all the means of art and science, because its wealth consists directly in the appropriation of surplus labour time; since value directly its purpose, not use value. It is thus, despite itself, instrumental in creating the means of social disposable time, in order to reduce labour time for the whole society to a diminishing minimum, and thus to free everyone’s time for their own development. But its tendency always, on the one side, to create disposable time, on the other, to convert it into surplus labour. If it succeeds too well at the first, then it suffers from surplus production, and then necessary labour is interrupted, because no surplus labour can be realized by capital. The more this contradiction develops, the more does it become evident that the growth of the forces of production can no longer be bound up with the appropriation of alien labour, but that the mass of workers must themselves appropriate their own surplus labour. Once they have done so – and disposable time thereby ceases to have an antithetical existence – then, on one side, necessary labour time will be measured by the needs of the social individual, and, on the other, the development of the power of social production will grow so rapidly that, even though production is now calculated for the wealth of all, disposable time will grow for all. For real wealth is the developed productive power of all individuals. The measure of wealth is then not any longer, in any way, labour time, but rather disposable time. Labour time as the measure of value posits wealth itself as founded on poverty, and disposable time as existing in and because of the antithesis to surplus labour time; or, the positing of an individual’s entire time as labour time, and his degradation therefore to mere worker, subsumption under labour. The most developed machinery thus forces the worker to work longer than the savage does, or than he himself did with the simplest, crudest tools.>
‘If the entire labour of a country were sufficient only to raise the support of the whole population, there would be no surplus labour, consequently nothing that could be allowed to accumulate as capital. If in one year the people raises enough for the support of two years, one year’s consumption must perish, or for one year men must cease from productive labour. But the possessors of [the] surplus produce or capital... employ people upon something not directly and immediately productive, e.g. in the erection of machinery. So it goes on.’ (The Source and Remedy of the National Difficulties, p. 4.)
<As the basis on which large industry rests, the appropriation of alien labour time, ceases, with its development, to make up or to create wealth, so does direct labour as such cease to be the basis of production, since, in one respect, it is transformed more into a supervisory and regulatory activity; but then also because the product ceases to be the product of isolated direct labour, and the combination of social activity appears, rather, as the producer. ‘As soon as the division of labour is developed, almost every piece of work done by a single individual is a part of a whole, having no value or utility of itself. There is nothing on which the labourer can seize: this is my produce, this I will keep to myself.’ (Labour Defended, p. 25, 1, 2, XI.) In direct exchange, individual direct labour appears as realized in a particular product or part of the product, and its communal, social character – its character as objectification of general labour and satisfaction of the general need – as posited through exchange alone. In the production process of large-scale industry, by contrast, just as the conquest of the forces of nature by the social intellect is the precondition of the productive power of the means of labour as developed into the automatic process, on one side, so, on the other, is the labour of the individual in its direct presence posited as suspended individual, i.e. as social, labour. Thus the other basis of this mode of production falls away.>
The labour time employed in the production of fixed capital relates to that employed in the production of circulating capital, within the production process of capital itself, as does surplus labour time to necessary labour time. To the degree that production aimed at the satisfaction of immediate need becomes more productive, a greater part of production can be directed towards the need of production itself, or the production of means of production. In so far as the production of fixed capital, even in its physical aspect, is directed immediately not towards the production of direct use values, or towards the production of values required for the direct reproduction of capital – i.e. those which themselves in turn represent use value in the value-creation process – but rather towards the production of the means of value creation, that is, not towards value as an immediate object, but rather towards value creation, towards the means of realization, as an immediate object of production – the production of value posited physically in the object of production itself, as the aim of production, the objectification of productive force, the value-producing power of capital – to that extent, it is in the production of fixed capital that capital posits itself us end-in-itself and appears active as capital, to a higher power than it does in the production of circulating capital. Hence, in this respect as well, the dimension already possessed by fixed capital, which its production occupies within total production, is the measuring rod of the development of wealth founded on the mode of production of capital.
‘The number of workers depends as much on circulating capital as it depends on the quantity of products of co-existing labour, which labourers are allowed to consume.’ (Labour Defended, p. 20.)
In all the excerpts cited above from various economists fixed capital is regarded as the part of capital which is locked into the production process. ‘Floating capital is consumed; fixed capital is merely used in the great process of production.’ (Economist, VI, 1.) This wrong, and holds only for the part of circulating capital which is itself consumed by the fixed capital, the matières instrumentales. The only thing consumed ‘in the great process of production’, if this means the immediate production process, is fixed capital. Consumption within the production process is, however, in fact use, wearing-out. Furthermore, the greater durability of fixed capital must not be conceived as a purely physical quality. The iron and the wood which make up the bed I sleep in, or the stones making up the house I live in, or the marble statue which decorates a palace, are just as durable as iron and wood etc. used for machinery. But durability is a condition for the instrument, the means of production, not only on the technical ground that metals etc. are the chief material of all machinery, but rather because the instrument is destined to play the same role constantly in repeated processes of production. Its durability as means of production is a required quality of its use value. The more often it must be replaced, the costlier it is; the larger the part of capital which would have to be spent on it uselessly. Its durability is its existence as means of production. Its duration is an increase of its productive force. With circulating capital, by contrast, in so far as it is not transformed into fixed capital, durability is in no way connected with the act of production itself and is therefore not a conceptually posited moment. The fact that among the articles thrown into the consumption fund there are some which are in turn characterized as fixed capital because they are consumed slowly, and can be consumed by many individuals in series, is connected with further determinations (renting rather than buying, interest etc.) with which we are not yet here concerned.
‘Since the general introduction of soulless mechanism in British manufactures, people have with rare exceptions been treated as a secondary and subordinate machine, and far more attention has been given to the perfection of the raw materials of wood and metals than to those of body and spirit.’ (p. 31. Robert Owen: Essays on the Formation of the Human Character, 1840, London.)
<Real economy – saving – consists of the saving of labour time (minimum (and minimization) of production costs); but this saving identical with development of the productive force. Hence in no way abstinence from consumption, but rather the development of power, of capabilities of production, and hence both of the capabilities as well as the means of consumption. The capability to consume is a condition of consumption, hence its primary means, and this capability is the development of an individual potential, a force of production. The saving of labour time [is] equal to an increase of free time, i.e. time for the full development of the individual, which in turn reacts back upon the productive power of labour as itself the greatest productive power. From the standpoint of the direct production process it can be regarded as the production of fixed capital, this fixed capital being man himself. It goes without saying, by the way, that direct labour time itself cannot remain in the abstract antithesis to free time in which it appears from the perspective of bourgeois economy. Labour cannot become play, as Fourier would like, [5] although it remains his great contribution to have expressed the suspension not of distribution, but of the mode of production itself, in a higher form, as the ultimate object. Free time – which is both idle time and time for higher activity – has naturally transformed its possessor into a different subject, and he then enters into the direct production process as this different subject. This process is then both discipline, as regards the human being in the process of becoming; and, at the same time, practice [Ausübung], experimental science, materially creative and objectifying science, as regards the human being who has become, in whose head exists the accumulated knowledge of society. For both, in so far as labour requires practical use of the hands and free bodily movement, as in agriculture, at the same time exercise.
As the system of bourgeois economy has developed for us only by degrees, so too its negation, which is its ultimate result. We are still concerned now with the direct production process. When we consider bourgeois society in the long view and as a whole, then the final result of the process of social production always appears as the society itself, i.e. the human being itself in its social relations. Everything that has a fixed form, such as the product etc., appears as merely a moment, a vanishing moment, in this movement. The direct production process itself here appears only as a moment. The conditions and objectifications of the process are themselves equally moments of it, and its only subjects are the individuals, but individuals in mutual relationships, which they equally reproduce and produce anew. The constant process of their own movement, in which they renew themselves even as they renew the world of wealth they create.>
. . .